REFRIGERATOR REPAIR
DRYER REPAIR
WASHER REPAIR
DISHWASHER REPAIR
STOVE REPAIR
OVEN REPAIR
MICROWAVE REPAIR
GARBAGE DISPOSAL REPAIR


CLICK HERE FOR MAINTENANCE & REPAIR SERVICES


Ask about our Sub-Zero, Viking, Wolf, Thermador specialist






Our Partners
Whirpool appliance repair in Dallas Fort Worth
GE repair in Dallas Fort Worth
Sub Zero & Wolf appliance repair
Frigidaire Washer & Dryer appliance repair
Dallas Fort Worth Kenmore Refrigerator repair



Appliance repair -> Washer repair

Appliance Doctors is your solution for delivery and installation of washers , and uninstalling washers in the Dallas Fort Worth area.

We provide services on All Brands of appliances such as Residential and Commercial washers. Appliance Doctors repairs and install all the brands and models of washers in Dallas Fort Worth. If your washer makes noise or you have any problem with it, just call  and let us take care of the rest. Appliance Doctors( Dallas Fort Worth washer repair) is available for your Dallas Fort Worth washer repair . Free service call free with the appliance repair.

Dallas Fort Worth washer repair service includes:

  • INSTALLING AND MOVING A WASHER
  • Service and repair all washer brands and models
  • Regular maintenance ,service and cleaning
  • MOTOR REPLACEMENT
  • Drain pump replacement
  • WATER LINE CLEANING
  • The Diagnostic Test  of the washer

Appliance Doctors service and repair follow washer brands and models:

  • Amana washer repair
  • Estate washer repair
  • Fisher & Paykel washer repair
  • Frigidaire washer repair
  • GE washer repair
  • Hotpoint washer repair
  • Kelvinator washer repair
  • Kenmore washer repair
  • LG washer repair
  • Samsung washer repair
  • Siemens washer repair
  • Westinghouse  washer repair
  • Whirlpool washer repair
  • Asko washer repair
  • Jenn-air washer repair
  • KitchenAid washer repair
  • Maytag washer repair
  • Sharp washer repair

 

How washer works
Washer machines get clothing clean by plunging the clothes through the water and detergent mixture. It is the motion that really helps to loosen dirt. In the old days, they used to beat wet clothes against a rock to get them clean.
In top loading machines the agitator twists back and forth pulling the clothes down to the bottom of the tub. The clothes then work their way back up to the top where the agitator grabs them again. In a front loading machine, the clothes tumble and are plunged into the water over and over again. After the water is pumped out, the inner drum uses centrifugal force to wring out more water from the clothes by spinning at several hundred RPMs.
While the operation of front loading washing machines is substantially similar to that of top loaders, note that the rest of this article addresses only the top loading style of washing machine.
The design of washing machines vary by manufacturer, but the general principles are essentially the same. The controls consist of a timer, cycle selector mechanism, water temperature selector, load size selector and start button. The mechanism includes the motor, transmission, clutch, pump, agitator, inner tub, outer tub and water inlet valve.
The washer has two tubs, the inner tub with hundreds of holes in it and the outer tub which holds the water. During the spin cycle the inner tub spins, forcing the water out through the holes to the stationary outer tub.
The cycle selector controls may include separate or integrated controls for water temperature, water level, cycle selection and a start switch A lid switch, which indicates whether the lid is open or closed, will interrupt some or all of the washer machines operations.
The water inlet valve connects to the water supply of your home and allows hot and cold water to flow into the tub.

The agitator is in the center of the inner tub. During the wash cycle, the agitator rotates back and forth (about 3/4 of turn) to pull the clothes through the water. At the conclusion of the wash cycle, the water is pumped from the outer tub and into the drain though the drai hose.
The pump, agitator and spin drum are driven by the motor. Some washing machines use direct drive, in which the motor is connected directly to the pump and transmission. Other machines uses a belt drive in which the motor drives the transmission through a pulley and belt. On belt driven machines, the pump is typically connected to the motor by a flexible coupling.
The transmission drives both the spin of the inner tub and the back and forth motion of the agitator. You washer has either a single direction or a reversing motor. With a single direction motor, an electromechanical device controls whether the transmission drives the agitator or the drum. Reversing motors control the drum when they spin in one direction and the agitator when they spin in the other.
Most washing machines use a clutch to reduce the force generated by fast starting motors. The clutch allows the transmission to grab the drum or agitator in a gradual manner rather than all at once. Some washers use a clutch mechanism while others rely on slippage and gradual tension of the belt and pulley.

 

 WASHER Basic Operating Checks

Here are some initial steps to help you diagnose and fix washer problems.
Step 1: Make sure the washer is receiving power. Check the cord, the plug, and the outlet. If a wall switch controls the outlet, make sure the switch is working. Look for blown fuses or tripped circuit breakers at the main entrance panel. If the unit is receiving power and still won't run, press the reset button on the control panel (if the washer has one).

Step 2:
Make sure the control knob is properly set to the ON position and the door is tightly closed. Check the latch to make sure it's free of lint and soap buildup.

Step 3:
Make sure that both water faucets are turned on and that the drain and soap-saver return hoses are properly extended, without kinks. If the washer has a water-saver button, make sure the button is depressed; water may not circulate through the filter nozzle if the basket is not full and the button is not depressed.

Step 4:
To make sure the water is the proper temperature, check the temperature selector switches on the control panel to make sure they're properly set. Also check the water heater temperature control. It should be set no lower than 120 degrees F.

Cleaning the Washer

Regularly clean the top and door of the washer to prevent the buildup of dirt and detergent. When you wash very linty materials, remove lint from the tub after removing the laundry. Soap deposits may cause laundry to smell bad. To solve this problem, fill the tub with water and add 1 pound of water softener or 1 gallon of white vinegar; then run the machine through the complete wash cycle. If the deposits are really bad, wash the inside of the tub with a solution of household ammonia and mild detergent. Rinse thoroughly and wipe the tub with liquid bleach. Caution: Rinse the tub thoroughly before wiping it out with bleach. Ammonia and bleach can combine to form a very dangerous gas.

Finally, run the machine through a complete wash cycle before you put any more laundry in.

WASHER REPAIR TIPS

  1. Make sure the lid is closed properly.
  2. Make sure the timer and all of the controls are set properly.
  3. Make sure both water faucets are turned on

The above tips are for informational purposes only. For your safety, we strongly recomend any washer repairs to be performed only by a certified technician. Dallas washer repair  technicians are available and you can call for professional help

Appliance Doctors Dallas Fort Worth washer repair coverage area includes entire Dallas Fort Worth and the surrounding cities:

City Zip Code
Arlington 76019, 76012, 76004, 76002, 76013, 76018, 76010, 76015, 76060, 76006, 76016, 76017, 76003, 76001, 76007, 76096, 76005, 76014, 76094, 76011,
Bedford 76022, 76021, 76095
Colleyville 76034
Coppell 75019, 75099
Double Oak 75077
Euless 76039, 76040
Flower Mound 75022, 75028
Fort Worth 76101, 76193, 76140, 76105, 76112, 76127, 76103, 76133, 76124, 76114, 76134, 76104, 76147, 76123, 76179, 76109, 76119, 76197, 76111, 76113, 76106, 76196, 76162, 76155, 76110, 76121, 76108, 76131, 76199, 76132, 76120, 76102, 76107, 76137, 76115, 76135, 76163, 76126, 76191, 76118, 76161, 76177, 76164, 76198, 76185, 76116
Grand Prairie 75051, 75052, 75053, 75054
Grapevine 76051, 76099
Highland Village 75077
Hurst 76034, 76053, 76054
Keller 76244, 76248
Mansfield 76063
N.Richland Hills 76118, 76180, 76182
Roanoke 76262
Southlake 76092
Trophy Club 76262
Westlake 76262
Watauga 76137, 76148
Allen 75002, 75013
Argyle 76226
Carrollton 75006, 75007, 75010, 75011
Cedar Hill 75104, 75106
Colony 75056
Dallas 75201, 75202, 75203, 75204, 75205, 75206, 75207, 75208, 75209, 75210, 75211, 75212 75214 75215 75216 75217 75218 75219 75220 75221 75222 75223 75224 75225 75226 75227 75228 75229 75230 75231 75232 75233 75234 75235 75236 75237 75238 75240 75241 75242 75243 75244 75245 75246 75247 75248 75249 75250 75251 75252 75253 75254 75260 75262 75263 75265 75266 75267 75270 75277 75283 75284 75285 75286 75287 75301 75303 75310 75312 75313 75315 75320 75323 75326 75334 75336 75339 75340 75342 75343 75344 75354 75355 75356 75357 75359 75360 75367 75370 75371 75372 75373 75374 75376 75378 75380 75382 75387 75390 75395 75397 75398
Duncanville 75116, 75137, 75138
Frisco 75034
Garland 75040, 75041, 75042,75043, 75044, 75045, 75046, 75047, 75048, 75049
Highland Park 75205, 75209, 75219
Irving 75014, 75015, 75016, 75017, 75037, 75038, 75039, 75060, 75061, 75062, 75063
Lewisville 75022, 75027, 75028, 75029, 75056, 75057, 75067, 75077
McKinney 75069, 75070, 75071
Mesquite 75149, 75150, 75180, 75181, 75182, 75185, 75187
Murphy 75094
Plano 75023, 75024, 75025, 75026, 75074, 75075, 75086, 75093, 75094
Prosper 75078
Richardson 75080, 75081, 75082, 75083, 75085
University Park 75205
Wylie 75098

 

| energystar.com - Appliance repair | homedepot.com - Dallas SubZero repair | Appliancedoctors.com - Dallas Appliances repair | Fix it Fort Worth |

| bestbuy.com | Subzero.com - SubZero repair | geappliances.com | Frigidaire.com/|

Appliance Doctors1989-2010